Construction Tricks to Prevent Pooling Water

When you think about construction sites, you may be thinking about keeping your employees safe and meeting your deadlines. Unfortunately, one construction problem that you may have to deal with at your next site is pooling water. Fortunately, with the right tactics, you can help to prevent this problem from happening in the future on your job sites. 

Use Sandbags Around the Perimeter 

A quick way to help keep water from pooling around your site is to install sandbags around its perimeter. This action tip is feasible for relatively smaller areas where you’re dealing with the most potential for standing water issues. It’s imperative to make sure that your bags are stacked in an even pattern so that they don’t get forced over by the weight of the water that they’re holding out. 

Set Up a Retention Pond 

Another great trick for preventing pooling water at your construction site is to institute a drainage system that goes to a nearby retention pond. This pond will be the perfect location for diverting any incoming water to your construction site. Your drainage may simply be a gravity feed pipe running from your job site to the retention pond. Or, it may be more complex where it requires pumps to move the water. 

Use Dewatering Pumps 

If you’re working on a project that will allow a large amount of water to make it into your job site, then you should consider using dewatering pumps. These can be set up to run consistently to help keep your job site free from standing water. The basic concept is to use these pumps to simply remove the incoming water and divert it to another location away from your job site. 

Plan to Backfill as Quickly as Possible 

Backfilling can be your best friend when it comes to preventing pooling water issues at your construction site. Anytime that you move soil below the water line, it can allow water to seep into your construction site. Once you install your foundation, piping, or other components, make it a priority to backfill. The sooner you fill that area, the less standing water you’re going to be dealing with. 

When you work in the construction industry, you can expect to deal with standing water at your sites from time to time. Having a plan in place to help prevent that water from seeping in, to begin with, can do wonders for eliminating water issues later on down the road. The above are four of the best construction tips for handling pooling water at a construction site that you can start implementing at your business today. 

About Brooke